OneSwitch Advanced is all you need to get started with a fully fledged smarthome. Now you can control your lights from your mobile device, tablet or computer, turn lights on when you arrive home or even setup automations to turn off all but one light at a certain time, for example at night. No need for expensive and inconvenient 'smart lights', by making the wall switch smart, any light can be made smart! The integrated environmental solution allows you to change and monitor energy use at any time by adjusting heating, disabling unwanted ligths and seeing a realtime view of the power useage right from your secure OneSwitch hub. Your whole house is connected to the OneSwitch live power monitoring solution allowing you to observe and control your energy useage in real time. When night falls, wnter power saving mode to reduce standby useage and wake up with your devices and appliances ready and waiting.
As with the standard and light packages, the OneSwitch advanced package also comes with IP67 WiFi RGB+W LEDs. These can be installed in a multitude of different locations including the backboard of a bed, the hallway flooring, the bathroom or the kitchen bar to give warm and moody low level lighting to excentuate your mood.
You can rest easy knowing your data is safe and secure in your own home and is never transitted to OneSwitch or any other third parties.
OneSwitch advanced consists of several wall switches, the cloudless hub and a sensor stack to detect when you are arriving home as well as LED strips, power monitoring equiptment and environmental sensors and controls. The responsibility for installation is the users. We regret that we can not provide installation at this time. We provide a complete step by step user installation manual and which requires the old wall switches to be removed and the new ones to be installed. The setup of the hub is as easy as visiting a webpage!
- 1x OneSwitch smart hub
- 2x Wall mounted touch panel
- 8x OneSwitch smart wall switches
- 1x Welcome home front door sensor
- 5x Door motion sensor combo
- 6x Environment sensor
- 2x CT507 radio thermostat
- 4x 5m RGBWW LED strip
- 4x WiFi LED strip controller
- 1x 4channel clip-on mains power monitor
- Advanced automations
- Full user and installation instructions
We build, program and test each one of our units at our Prilly office. Due to the large variey of systems we offer, each must be assembled to order so that it meets your expectations. We keep a stock of components ready to assemble, but due to the number of elements to be tested for this system we aim to ship with PostPac Priority no later than 3 weeks after recieving your order. We will keep you informed about order progress from receipt through manufacture and all the way to shipping.
OneSwitch MQTT smart switches are available in two different colors and three different configurations. The switches come out of the box ready configured to operate so there is zero configuration.
White (default) or black
one two or three buttons on each switch
3x 1 channel
1x 3 channel
- Compatibility: MQTT/API/HTTP/WEB
- Standard:EU Plug (62mm)
- Power Supply: 90V-250V AC
- Max. Current: 3A/250V/channel
- Max. Power: 600W/gang
- Wireless Standard: WiFi 2.4GHz IEEE802.11a/b/g/n
- Material: ABS + Toughened Glass Pane
Track changes in air quality, temperature and humidity with your OneSwitch environment sensor.
Watch daily variations in the temperature as you turn on the heating, watch the air quality improve when you open the window after rain and keep your houses relative humidity at a comfortable level. Watch the changes on graphs and charts as a function of time.
- Model: Bosch BME680
- State of Assembly: Ready-to-GoG
- Pressure: 300...1100 hPa
- Humidity 0…100%
- Temperature: -40…85°C
- VOC deviation S2S 15%
- Response time 1ms
- Update period up to 60Hz
OneSwitch is a cloudless smart home solution. Your data and the controller uniquely use the smart hub, no data is exchanged with third parties or with OneSwitch. The smart hub runs a modified version of the wildly popular Homeassistant software. The switches and interfaces are all finished in Switzerland, a country with very strong privacy and data protection laws.
The hub is a small object that we recommend you connect to your router via the provided internet cable.
- Working voltage: 5VDC
- Dimensions: 85mmx56mmx25mm
- Connectivity: Ethernet
Your system comes out of the box containing a few simple automations, such as turning on the lights when you arrive home and a button to turn off all lights.
Automations can be added via the user interface as explained in the user manual. Alternatively, automations can be added by editing configuration files on the hub.
The radiotherm thermostat connects to your wifi network allowing the controller to monitor and adjust household temperatures with ease. Now you can control the heating of your house with greater precision than ever before whilst collecting valuable information about energy useage from the environmental sensors placed around your home.
- Working voltage: 24VDC
- Dimensions: 11.5cmx3cmx11.5cm
- Battery backup: 3x AA LiFeS batteries included
WiFi LED Strip
LED strips are reels of LEDs that can be used to change the mood of a room. The controller allows you to simply change the color and brightness of the LEDs from the smarthub user interface. The strips are ideal for transforming the bedroom or the kitchen by adding low level lighting to suit your mood.
OneSwitch uses IP67 dual channel RGB+WW LED strips with a self adhesive to allow easy installation at any position in the home.
- LED Type: 5050 SMD
- Working Voltage: DC 24V
- 60WW LED/m
- 60RGB LED/m
- Luminosity: 14lm/m
- Controller dimensions: 93 x 46 x 20mm
- Load limit: 96W/channel
- Working voltage: 24VDC
- 24V 8A Power supply included.
Door and motion combo
The welcome home sensor can detect when you are coming home. By adding more sensors around the house, occupancy of rooms can be determined and you can add more automations based on this information. Perhaps you want the bathroom light to activate at night or the ligts to turn off when everyone has left. With door and motion sensors placed around your house this is now a possibility.
The sensor contains a infrared motion sensor and a door sensor with an onboard microprocessor. The microprocessor reads the states of motion and the door in real time and reports changes to the OneSwitch cmart hub.
- Working voltage: 5VDC
- Dimensions: 45mmx25mmx45mm
- Connectivity: WiFi IEEE802.11a/b/g/n
- Power: <1W
We deliver a fully configured, IotaWatt full home energy monitoring solution. It is easily installed with snap-around current sensors for the mains, and wall power. It connects directly to the OneSwitch hub which displays the real-time data.
- Open hardware with open source firmware.
- Can be used with three-phase power systems.
- Stores high resolution usage data.
- All connections plug and jack with up to 14 additional channels available from OEM.
- ETL certified to UL standards, FCC and CE.
- Half the cost of popular highly advertised alternatives
- IoTaWatt Base station
- Wall mount
- USB Power Supply
- AC Reference Transformer
- 1x ECS12-100 100A CT for mains measurement
- 2x ECS10-50 CTs
OneSwitch can provide comprehensive telephone support including working remotely on the setup. To enable this you will need to follow the instructions found in the user manual. Once support is complete, follow the removal instructions in the user manual.
Refunds and Warranty
OneSwitch aims to provide complete satisfaction. Each unit is tested in our Prilly office before shipping to ensure functionality. If there are any defects with the unit upon delivey, we will replace it. The system can be refunded no questions asked within 7 days of purchase for a 50CHF restocking fee.
For damage occuring during normal operation within the first year, replacements can be sent after contacting our customer service.